Model 4400 Surface
Replication With Microset®
Model 4400 Surface Replication with Microset®
Microset replicas make it possible to inspect internal surfaces that are inaccessible using the Optical Micrometer alone. The high-resolution replicas are residual-free and can be removed from pits, tubes and other uneven surfaces.
- Threaded Holes
- Inside Diameters
- Spline Inspection
- Re-Entrant Geometries
- Delicate Surface Finishes
Microset compounds are specially designed for the high resolution replication of surface details. They come as ina convenient and reliable cartridge application systems that allow replicas to be made, in any shape or size, of most solid non-porous surfaces.
Microset compounds have sub-micron resolution and are dimensionally stable for geometric measurement. The elastic replicas can be removed from holes, tubes and moderate re-entrant geometries without damage to the replica surface.
Microset is easy to apply and available in a variety of grades with varying cure times, viscosity and color to support different applications and environments.
For more information on Microset,
visit the manufacturer’s website at
www.microset.co.uk
Microset Fluid Replicating Compounds
Microset 101 Fluid Compounds are high resolution, two part silicone polymers designed for replication of metal surfaces. The free-flowing nature of these compounds minimizes the risk of air entrapment in the replica, and makes them easy to apply over large areas. They are suitable for replicating rough surfaces, cavities, tubes, threaded holes etc.
Technical Specifications:
- Resolution: 0.1 microns
- Shelf Life: 24 months
- Cured hardness: 28-30 Shore A
- Shrinkage: Less than 0.1%
- Color: Black or Grey
- Usable temperature range: -10C to +180C
Microset Thixotropic Replicating Compounds
Microset 101 Thixotropic Compounds are high resolution, two part silicone polymers designed for replication of metal surfaces. The thixotropic nature of these compounds allows them to be applied on vertical and overhead surfaces without the compound dripping or flowing away from the area of interest.
Technical Specifications:
- Resolution: 0.1 microns
- Shelf Life: 15 months
- Cured hardness: 28-30 Shore A
- Shrinkage: Less than 0.1%
- Color: Black or Grey
- Usable temperature range: -10C to +180C
GRADE
101RF
101FF
101XF
101FS
101RT
101TH
101THS
101XFT
WORKING LIFE
0.5 MIN
4 MIN
15 MIN
50 MIN
0.5 MIN
3 MIN
7 MIN
15 MIN
CURE TIME
5 MIN
30 MIN
60 MIN
210 MIN
5 MIN
20 MIN
30 MIN
60 MIN
KEY FEATURES
General purpose fast curing fluid material.
General purpose fluid material.
Specialist purpose material.
Specialist purpose material.
Fast curing thixotropic material.
General purpose thixotropic material.
Specialist purpose material.
Specialist purpose material.
TYPICAL APPLICATIONS
Replication of horizontal or sloping surfaces. Use in low
temperature conditions or where rapid results are required.
Replication of horizontal or sloping surfaces. Use in normal
or high temperature conditions.
Replication of horizontal or sloping surfaces.
Replication of horizontal or sloping surfaces.
Replication of vertical or overhead surfaces. Use in low
temperature conditions or where rapid results are required.
Replication of vertical or overhead surfaces. Use in normal
or high temperature conditions.
Replication of vertical or overhead surfaces.
Replication of vertical or overhead surfaces.